Basic Photography Course

7-15.

You are standing "duty PH" alone at

a base imaging facility.

The CO of

the base personally brings in a

copyrighted document that he needs
copied to a 35mm slide at once.

What action should you take?

Tell the CO you cannot copy

the document because it is

copyrighted

Mask the copyright notice,

then copy the document

Ensure the CO knows that the
document is copyrighted before

you begin the job

Make an extra slide of the
document and forward it to
the CNO

7-16.

It is illegal to photograph United
States currency.

True

False

Learning Objective:

Recognize

equipment,

film, and lighting

techniques used for photographic
copying.

7-17.

For an imaging facility that

performs a large quantity of copy

work, what focusing system is best?

SLR

Rangefinder

Ground glass

Split level

7-18.

What is the minimum desired bellows

extension for a copy camera?

The lens focal length

Twice the lens focal length

Three times the lens focal

length

Four times the lens focal
length

7-19.

What type of lens is designed

specifically for copying?

Process

Convertible

High resolve

Two dimensional

7-20.

What primary factor determines the

focal-length lens you should use
for copy work?

The lens-to-original distance

The size of the original

The distance from the light
source to the original

The size of the negative

7-21.

For copy work, you should use which

of the following lenses, in inches,
on a camera that produces an 8x10-
inch negative?

1. 8
2. 10
3. 12

4. 18

7-22.

The copyboard of a copy camera
should not be white or a light
color for which of the following

reasons?

The film will be overexposed

The film will be underexposed

The reproduced image will lack
good contrast

The reproduced image will have
excessive contrast

7-23.

What is the color temperature

rating of tungsten lamps?

3200 K and 3400 K

5400 K and 7200 K

7400 K and 9600 K

10,000 K and 21,000 K

7-24.

What is the approximate lifetime,

in hours, of a 3400 K lamp?

1. 5
2.

3. 3
4. 34

7-25.

What type of light source is best

suited for copying a painting with

rough surface?

3200 K tungsten lamp

Fluorescent lamp

Electronic flash

Quartz-halogen lamp

contents

Basic Photography Course

<- previous page

next page ->


DOFMaster for Windows On-line Depth of Field Calculator DOFMaster for Mobile Devices On-line Depth of Field Table Hyperfocal Distance Chart Articles FAQ Recommended Books Support Contact Links Home As an Amazon Associate I earn from qualifying purchases.	contents <- previous page next page -> 7-15. You are standing "duty PH" alone at a base imaging facility. The CO of the base personally brings in a copyrighted document that he needs copied to a 35mm slide at once. What action should you take? 1. Tell the CO you cannot copy the document because it is copyrighted 2. Mask the copyright notice, then copy the document 3. Ensure the CO knows that the document is copyrighted before you begin the job 4. Make an extra slide of the document and forward it to the CNO 7-16. It is illegal to photograph United States currency. 1. True 2. False Learning Objective: Recognize equipment, film, and lighting techniques used for photographic copying. 7-17. For an imaging facility that performs a large quantity of copy work, what focusing system is best? 1. SLR 2. Rangefinder 3. Ground glass 4. Split level 7-18. What is the minimum desired bellows extension for a copy camera? 1. The lens focal length 2. Twice the lens focal length 3. Three times the lens focal length 4. Four times the lens focal length 7-19. What type of lens is designed specifically for copying? 1. Process 2. Convertible 3. High resolve Two dimensional 7-20. What primary factor determines the focal-length lens you should use for copy work? 1. The lens-to-original distance 2. The size of the original 3. The distance from the light source to the original 4. The size of the negative 7-21. For copy work, you should use which of the following lenses, in inches, on a camera that produces an 8x10- inch negative? 1. 8 2. 10 3. 12 4. 18 7-22. The copyboard of a copy camera should not be white or a light color for which of the following reasons? 1. The film will be overexposed 2. The film will be underexposed 3. The reproduced image will lack good contrast 4. The reproduced image will have excessive contrast 7-23. What is the color temperature rating of tungsten lamps? 1. 3200 K and 3400 K 2. 5400 K and 7200 K 3. 7400 K and 9600 K 4. 10,000 K and 21,000 K 7-24. What is the approximate lifetime, in hours, of a 3400 K lamp? 1. 5 2. 9 3. 3 4. 34 7-25. What type of light source is best suited for copying a painting with rough surface? 1. 3200 K tungsten lamp 2. Fluorescent lamp 3. Electronic flash 4. Quartz-halogen lamp 50 contents Basic Photography Course <- previous page next page ->	As an Amazon Associate I earn from qualifying purchases.
	WWW.DOFMASTER.COM © 2006 Don Fleming. All rights reserved.