DOFMaster
for Windows

On-line
Depth of Field
Calculator

DOFMaster for Mobile Devices

On-line
Depth of Field
Table

Hyperfocal
Distance Chart

Articles

FAQ

Recommended
Books

Support

Contact

Links



Home




As an Amazon Associate I earn from qualifying purchases.






9-20.
When hand processing black-and-
white prints, you should use what
minimum number of trays?
1.
One
2.
Two
3.
Three
4.
Four
9-21.
What number of trays is recommended
for hand processing black-and-white
prints?
1.
Five
2.
Seven
3.
Three
4.
Four
9-22.
Contact printing produces what
negative to print ratio?
1. 1:1
2. 2:1
3. 1:2
4. 2:2
9-23.
What grade of glass should be used
when making color contact prints?
1.
White
2.
Neutral
3.
Crystal
4.
Clear A1
9-24.
When using a proof printer, you
should place the emulsion side
of (a) paper and (b) film in what
direction?
1.
(a) Down (b) down
2.
(a) Down (b) up
3.
(a) Up
(b) up
4.
(a) Up
(b) down
9-25.
What is the main purpose of
a masking device in a contact
printer?
1.
It protects the glass from
scratches
2.
It allows the prints to be
produced with white borders
3.
It holds the paper in place
4.
It separates the negative from
the glass
9-26.
9-27.
9-28.
9-29.
9-30.
When viewed under a light source,
the emulsion side of (a) film and
(b) paper have what appearance?
1.
(a) Shiny (b) shiny
2.
(a) Shiny (b) dull
3.
(a) Dull (b) dull
4.
(a) Dull (b) shiny
What affect occurs when the
material used to mask a contact
print is too thick?
1.
The print requires an excessive
amount of exposure
2.
The print image is reversed
3.
The image is blurred along the
edges
4.
The paper does not get exposed
What term describes the guide on a
contact printer that aides quick
and proper paper alignment?
1.
Mask
2.
Goldenrod
3.
Paper stop
4.
Print border mark
Learning Objective:
Identify steps
used to process black-and-white
paper and control the contrast of
black-and-white prints.
When hand processing black-and-
white prints, the image on the
paper should appear in what length
of time, in seconds?
1. 30
2. 15
3. 10
4. 5
You made a contact print with a
number 3 contrast printing filter,
but the print lacks adequate
contrast.
Which of the following
filters should you use to make the
reprint?
1.
No. 1
2.
No. 2
3.
No. 1 1/2
4.
No. 4
67

Basic Photography Course

As an Amazon Associate I earn from qualifying purchases.





WWW.DOFMASTER.COM
© 2006 Don Fleming. All rights reserved.