9-69.
9-70.
9-71.
9-72.
A color test print has a yellow
color cast.
Using a subtractive
type of printer, you should make
what modification to the filter
pack?
1.
Subtract yellow only
2.
Add yellow only
3.
Add blue only
4.
Add magenta and cyan
Your calculated color printing
filter pack is CC10Y + CC15M +
CC05C.
What should the actual
filter pack be for the reprint?
1.
CC15Y + CC25M only
2.
CC15Y + CC25M + CC10C
3.
CC05Y + CC15M only
4.
CC05Y + CC15M +CC05C
A color test print has a blue color
cast.
Using an additive type of
printer, you should make which of
the following adjustments?
1.
Add blue
2.
Subtract blue
3.
Add yellow
4.
Either 2 or 3 above
What is the purpose of a standard
negative?
1.
It is used as a comparison
of negative printing qualities
2.
It serves as a tool to compare
the printing characteristics
of different emulsions
3.
It can be used to program
color analyzers and automated
printers
4.
Each of the above
9-73 .
You took portraits of four sailors.
Each sailor had distinctly
different skin tones; however,
after the negatives were printed,
all the skin tones were depicted
alike.
What is the most probable
cause of error?
1.
A skin tone was used for
negative evaluation
2.
The studio lights were the
wrong Kelvin temperature
3.
The same portrait lights were
used to photograph all four
sailors
4.
The characteristics of the
negative-positive system are
such that all skin tones are
reproduced alike
9-74.
You are processing color prints
using the RA-4 process.
What is
the approximate total processing
time in minutes?
1.
2 3/4
2.
4 1/2
3.
8 1/4
4. 12
9-75.
Which of the following charac-
teristics apply to a minilab
system?
1.
It requires maintenance
2.
It is capable of producing
a high volume of prints
3.
It is operated under normal
lighting conditions
4.
Each of the above
72

Basic Photography Course












As an Amazon Associate I earn from qualifying purchases.











WWW.DOFMASTER.COM
© 2006 Don Fleming. All rights reserved.