DOFMaster
for Windows On-line Depth of Field Calculator DOFMaster for Mobile Devices On-line Depth of Field Table Hyperfocal Distance Chart Articles FAQ Recommended Books Support Contact Links Home As an Amazon Associate I earn from qualifying purchases. |
the subject with the camera. When you are flying low, the target may "shoot" past you so fast that the shutter speed cannot "stop" it. This results in a photograph that is not sharp. To prevent this, "follow the target" (pan) with your camera. The pan must be continuous and smooth. Move the camera in the direction opposite to the direction of flight, keeping the lens fixed at some point on the target. With this technique, the image on the film does not move as much as it would if the camera were held still. by the structure of the aircraft. Do not include the tip of a wing or any other part of the aircraft in your photographs, unless you do it intentionally (fig. 4-25). The views of the target are best when the aircraft is approaching or leaving the target and the target is off to one side. At a level altitude, in fixed-wing aircraft, you may have difficulty excluding the tip of the wing from the view of the camera. You can tell the pilot to bank the aircraft; that is, raise the wing of a high-wing aircraft on the side from which you are shooting. You can also when the aircraft passes the target. This maneuver should lift or drop the wing of the aircraft out of the picture area. Another flight maneuver for getting the wing of the aircraft out of the picture is to have the pilot crab the plane. After the plane is crabbed, it is on a different heading than the original direction of flight; thus the wing is outside the area of the photography. are raised from the area of the photograph. This minimizes the chance of rotor blades appearing in the open window or door, be sure you have a good grip on the camera and all loose objects, and camera parts are well-protected and secured. plexiglass, or glass, can cause a slight shift in image Advanced Photography Course |
As an Amazon Associate I earn from qualifying purchases. |
WWW.DOFMASTER.COM
© 2006 Don Fleming. All rights reserved. |